Ar-15 M-Lok Rail Cover Type 2 Polymer Magpul

Product Description

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto M-LOK compatible systems. These M-LOK Covers are non-orientation specific which allow the user to mount them in any direction desired without affecting function. The contact surfaces on these covers are textured using the Magpul TSP texture for additional grip, adding slightly more than 1/8” from the mounting surface, these covers also feature a beveled contour to minimize potential snagging. The locking tab is pre-scored down the center to allow the user to snap off sections and mix and match colors for a more custom look. Includes six panels. Each covering one M-LOK slot.

SPECS: Fits- M-LOK Handguards.

Product Description

Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight. Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

SPECS: MAG593 - 11 Slots, max overall length of 4.9” MAG592 - 9 Slots, max overall length of 4.1”, MAG591 - 7 Slots, max overall length of 3.3” MAG589 - 3 Slots, max overall length of 1.6”.

Product Description

Protects Hands from Sharp Edges, Enhances Gripping Surface

Bravo Company’s BCM M-LOK® Rail Panels cover up unused M-LOK® slots on your handguard to give you a more comfortable, secure hold on your rifle. BCM M-LOK® Rail Panels are made of a flexible polymer material that can be cut to length. Panels are bi-directional, meaning they don’t have "front" and "back" end - just snap ’em on where you need ’em and go back to shooting.

• Lightweight, low-profile
• Cut to any length
• Perfect for your BCM MCMR handguard
• Available in Black or Flat Dark Earth

Bravo Company BCM M-LOK® Rails are ventilated for cooling to help prevent accuracy-robbing heat warpage of the barrel. The exterior each panel is curved to give your handguard a comfortable, easy-to-grasp nearly circular contour.

Product Description

M-LOK Type 1 Rail Covers are low-profile and light weight covers that install directly onto M-LOK compatible systems. Made of an extremely heat resistant material, these covers offer an enhanced gripping surface. At 9.5” in length they cover six full M-LOK slots but can be cut to be customized for length or combination of colors. Includes two panels.

Product Description

• Made to fit ALL KeyMod mounting surfaces with seven (7) consecutive KeyMod Slots.
•  Ultra-slim and radiused surface to allows a “round” handguard feeling, from an Octagonal profile.
•  Aggressive Non-Slip or Non-Reflective surface.
•  Ventilated for cooling.
•  Bi-directional. Locking tabs on either end, depending which direction they are installed.
•  Measurements: Length 5.550”, Width 0.625 ”, Thickness 0.100”
•  Can be cut to any length, depending on users requirements.
•  Made in the U.S.A. of a high-strength polymer material.
•  Each Kit contains Five (5) matching color KeyMod Panel Strips.
   

SPECS: Length: 5.550", Width: .625", Thickness: .100", 5 Pack.

Product Description

Add Rail Sections To KeyMod Handguards

Aluminum Picatinny rail segments fit onto Midwest Industries KeyMod rails and give accessory mounting space. Will also fit any other KeyMod rail. Includes mounting hardware. Available in 2.1" segment with 5 slots, or 3-3/4" segment with 9 slots. All rail segments sold separately.

SPECS: 6061 T6 Aluminum, matte black finish.

Product Description

ERGO ladder rail covers are the original Picatinny rail cover, and still one of the best available. Taking up the smallest amount of space, the ladder rail covers protect Picatinny rails from damage, as well as other gear and the shooter from sharp edges. When installed, Ladder Rail Covers provide a comfortable, secure grip. Each Ladder Rail Cover goes over 25 slots, with 3 Ladder Rail Covers to a pack.

Product Description

Configure Accessory Rails & Swivels On Tactical Rifles For Each Mission

 Rail Kits designed for JP system, will also work with many other free-float tubes. Modular handguard/rail system gives the tactical shooter maximum flexibility to customize the number, position, and length of accessory rails on his rifle. Mount rails or sling swivels at 45° intervals around the handguard.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Steel inner barrel nut, swivel studs, and setscrews with matte black oxide finish. 2" (5cm) dia. without attachments. Includes inner and outer barrel retainer nuts and 2 sling swivels with backer plates, setscrews. Rails – MIL-STD 1913 Picatinny cut. Backer plates and Allen head mounting screws included. Rifle rail is 11-1⁄2" (29.2cm) long; mid-length rail is 9" (22.9cm) long.

Product Description

Press Into Empty Cross Slots For Enhanced Grip & Rail Protection

Flexible ladder-style panel snaps securely into unused cross slots on Picatinny rails, protecting against dirt and dings and improving grip and weapon control. Prevents sharp rail edges from digging into your hand, snagging on clothing, and causing damage to gear, like cut and frayed slings or repelling ropes. Made of rubbery, slip-resistant Santoprene™ thermoplastic elastomer, the ultra-low-profile design keeps your handguard diameter slim. Covers 18 slots or can easily be trimmed to custom lengths and fitted between mounted accessories. To remove, simply pry up a corner and peel off. Manufactured by Falcon Industries.

SPECS: Santoprene rubber. 6-15/16" (17.6cm) long. Fits one side of standard carbine-length 1913 Picatinny rail.