- This Ar-15 Picatinny M-Lok Rail Aluminum Midwest Industries, Inc. is incredibly very good, with a lot of like to appear see you here propose. try out to visit and come across it priced honest get a good deal no cost transport purchase. truly easy thanks quite a bit.
- seem to the numerous that deserve to become both high-priced and. But amazed with all the obtain and delivery of the method listed here. not likely unhappy this buy to the world wide web. good assistance, very impressed
- To stroll by, in accordance to the division, and normal retailers located that rates here less expensive, superior high quality Ar-15 Picatinny M-Lok Rail Aluminum Midwest Industries, Inc.store various straightforward-to-use solutions and make contact with me obtain below and thus on. well then, would you tell a friend. almost all of this amount.
- uncomplicated, rapid conserve it is possible to examine charges and buy other Ar-15 Picatinny M-Lok Rail Aluminum Midwest Industries, Inc. obtainable promptly. cozy.
Click to get LowPrice Ar-15 Picatinny M-Lok Rail Aluminum Midwest Industries, Inc.
If you find product , Deals.If at the time will discount more Savings So you already decide you want have Ar-15 Picatinny M-Lok Rail Aluminum Midwest Industries, Inc. for your, but you don't know where to get the best price for this Ar-15 Picatinny M-Lok Rail Aluminum Midwest Industries, Inc. . We already done the research and spend a lot of time for you. Ar-15 Picatinny M-Lok Rail Aluminum Midwest Industries, Inc. to find out where to get the best deal on Ar-15 Picatinny M-Lok Rail Aluminum Midwest Industries, Inc..
If the Ar-15 Picatinny M-Lok Rail Aluminum Midwest Industries, Inc. is integrated that you must have, be sure to order now to stay away from disappointment Click on right here to find out exactly where to get the very best deal on Ar-15 Picatinny M-Lok Rail Aluminum Midwest Industries, Inc..
Midwest Industries offers these M-LOK compatible 1913 Picatinny rail sections in 3 slot, 5 slot, 7 slot and 9 slot lengths. Made from 6061 aluminum and hard coat anodized, all mounting hardware is included.
SPECS: Material: 6061 Aluminum.
The 4-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter’s hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel. Available in Black, Flat Dark Earth or OD Green.
Bolt-on MIL-STD 1913 rails give your MOE handguard plenty of accessory mounting versatility. Available in four lengths, so you can position just enough rail area exactly where you need it for each accessory. Clamps easily to the slots in the handguard with the included steel mounting hardware. Also fits many standard plastic handguards with proper center-to-center (c-to-c) hole spacing.
SPECS: Reinforced molded polymer, steel hardware, matte black. L2 – 5 slots, 2½" (6.4cm) long, 1.2" (3.1cm) c-to-c hole spacing. L3 - 7 slots, 3¼" (8.2cm) long, 1.6" (4.1cm) c-to-c hole spacing. L4 - 9 slots, 4" (10.2cm) long, 2.4" (6.1cm) c-to-c hole spacing. L5 - 11 slots, 5" (12.7cm) long, 3.2" (8.2cm) c-to-c hole spacing.
Tough, polymer cover slides over Picatinny rails to protect shooter’s hand from sharp edges of unused rails, and shield exposed rails from damage during rough tactical operations. Makes rail less likely to snag clothing and equipment and gives the rounded contour of a smooth, circular handguard with the freedom to reconfigure accessories whenever you need to. Rubber-like, pebble-texture grip surface helps shooter maintain better weapon control. Each panel covers 15 rail slots—the correct length to fit many carbine-length handguards without modification. Pre-segmented construction for ease in cutting to length to custom fit on other handguards. Multiple sections can be mounted one after the other for smooth, visually continuous cover on longer handguards.
SPECS: Synthetic polymer, matte black pebble finish. 6¼” (15.9cm) long x 1-3⁄8" (3.5cm) wide. Fits Picatinny and Weaver-style accessory rails. Covers 15 rail slots.
The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, the Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary. Eight section will make four panels that cover one side of a carbine-length rail. Available in Black, Flat Dark Earth, and OD Green.
SPECS: Fits 1913 Picatinny Rails
The Kinect™ by KDG for MLOK™ is a revolutionary QD mounting system that will change the way we attach accessories to our modular weapons platforms. Much like the Sidelok™ for Picatinny attachment, Kinect™ insures proper and easy installation, eliminating common variables that would cause issues.(ie: over tightening) Although revolutionary, Kinect™ is quite simple in its operation. There are two spring-loaded wedges in the base of the Kinect™ mounting point. When you press the accessory or rail section down in the MLOK™ slot, two tiny deployment triggers get pressed against the rail firing the wedges into place. There is nothing more frustrating that fiddling with an allen wrench (if you can find it) to get your accessories on an off your weapon with traditional modular rail sections. This changes the whole dynamic of the MLOK™ system and really makes every accessory truly removable with the ability to mount it in a second when needed.
SPECS: Length: 1.68″ (42.8mm) Use with one MLOK section, Width: .82″ (20.9mm), Height (Over MLOK): .41″ (10.5mm), Finish: Black Anodized, Compatibility: Compatible with any MLOK rail system, Weight: 0.8oz.
Lightweight, aluminum mount attaches to AR-15 handguards; gives quick, sturdy mounting for lights, forward grips, bipods and tripods. Fits standard, round, plastic, AR-15 and CAR-15 handguards without removing the heat shield. Requires removal of heat shield to fit M4 handguards. Can be attached to top or bottom handguard. Accepts Weaver-style accessories. 4" w/adapter permits use with 2" diameter aluminum float tubes, also fits standard handguard.
SPECS: Aluminum, anodized, black. 2", (5cm), 4" (10.1 cm) and 6" (15.2cm) long. Includes mounting bolts and hardware. 4" w/adapter and 6" Platform also include low profile rail covers.
The ERGO M-LOK WedgeLoK Slot Cover Grips are made to fit the MLOK hand guards. They are made of Santoprene rubber and provide a non-slip gripping surface. They are low profile with an aggressive texture. Each Slot Cover Grip will cover 4 MLOK slots. There are 4 covers per package.
SPECS: Santoprene Construction - Heat resistant - Positive non slip gripping surface - Low profile with aggressive texture - Covers 4 MLOK slots - 6 1/4" long and 5/8' wide.