SIG SAUER offers the SBX Pistol Stabilizing Brace, an second generation to the SB15 Pistol Stabilizing brace, a shooter's aid that is designed to improve the single-handed shooting performance of buffer tube equipped pistols. The SBX features a more slim design with a thicker strap for extra stability. This veteran-designed accessory enhances accuracy and reduces felt recoil when using an AR-style pistol. Made from high-quality, elasto-polymer, the SBX15 is manufactured to close tolerances and fits all pistols equipped with an AR-style buffer tube 1.0” – 1.2” in diameter. The Pistol Stabilizing Brace uses the operator’s forearm to provide stable support, thereby minimizing accuracy-robbing spin and shift. A flexible cuff with two adjustable nylon straps allows the SBX15 to be custom fit to any user.
ATF has reviewed this product and determined that attaching the SB15 to a handgun does not alter the classification of the firearm or subject the firearm to NFA control if the SB15 is used as designed—to assist shooters in stabilizing a handgun while shooting with a single hand.
The Sig Stabilizing Brace is not to be used as a shoulder stock. Using the brace as a stock while installed on a pistol constitutes a “redesign” of the device according to the ATF and misuse of the brace may subject the user to severe criminal penalties. If used as a stock, the resulting firearm will be subject to all provisions of the NFA and all NFA rules would apply.
Maxim Defense changes the AR-15 pistol market with this CQB PDW Pistol Brace. Built with the same technology and features of their CQB stock, this 4 position brace is designed to wrap around the shooters arm and be secured with the hook and loop strap. Easy to deploy, the CQB PDW Brace simply pulls out to the desired position and locks in place, with no buttons to push. Includes the Standard weight JP Silent Captured Springs which has been manufactured exclusively for Maxim Defense to work with the Maxim Defense CQB PDW Brace.
Exclusive Dwyer “Group Gripper” acts like an instant accurizing job for standard or factory barreled guns. Full-length guide rod with heavy, internal spring forces barrel top lugs upward into the slide. Gives maximum lug engagement, positive lockup and far more consistent shot-to-shot repeatablility.
The BCM AR-15/M16 Pistol Receiver Extension kit has a 1.2” outside diameter which makes it compatible with the Sig Sauer SB-15 Stabilizing Brace. Made from 7075 T6 aluminum with a hard coat anodized finish, the kit also includes a castle nut, carbine buffer, carbine action spring, and QD receiver end plate.
SPECS: Made in the USA and manufactured from high quality 7075 T6 aluminum.
If you're already set up with a stabilizing brace on your AR-style pistol, then you can enhance your setup by adding the DoubleStar Strongarm Pistol Brace to your firearm. This all-new design is machined from billet aluminum and secured onto all AR-style pistol buffer tubes with a pair of screw-on clamps.
During firing, the Strongarm pistol-stabilizing brace is equipped with a hook-and-loop strap that allows it to be attached securely to a user's forearm, ensuring that they stay on target and in control of their gun. The company recommends that users pair their Strongarm brace with an AR400 pistol-buffer tube featuring a diameter of 1.19 inches.
Dual-spring, guide rod system gives smooth, gentle slide movement to significantly reduce muzzle flip and felt recoil. Proprietary, tuned springs help control muzzle rise to get you back on target faster. Primary recoil spring absorbs initial slide movement as the secondary spring gently slows and stops the slide. Softens initial chambering impulse to gently strip rounds from magazine. Improves feeding reliability, reduces sensitivity to magazine lip style. Twin-Pack contains one light system and one heavy system. Shooter preference and experience will help determine choice of heavy or light system.
The CZPDW Pistol Stabilizing Brace® from SB Tactical is a 3-position adjustable brace that features a pull-through design that allows the user to quickly extend the brace without having to depress the button. The CZPDW Pistol Stabilizing Brace® is made of 6061 hard-coat anodized aluminum for a reliable and functional brace. The CZPDW provides you with all the advantages of a pistol with improved control by adding a third point of contact for stabilization.